 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-1-07
|
1999
|
$35,000.
|
|
Description
|
|||
Weinig Unimat 1999
U-23 E - 440 volt
1st bottom - 10 h.p.
Right/Left - 20 h.p.
Top - 20 h.p.
Last Bottom - 15 h.p.
|
6" tall vertical spindles
 Central Lubrication
6" x 9" working dimensions
|
||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-2-07
|
1997
|
$41,500.
|
|
Description
|
|||
Weinig Unimat 1997
U-23E 440 volt
1st bottom - 10 h.p.
Right/Left - 15 h.p.
Top - 15 h.p.
Top - 15 h.p.
Bottom - 10 h.p.
|
1 1/2" spindles
Central Lubrication
|
||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-3-07
|
2002
|
$48,000.
|
|
Description
|
|||
Raimann KM 1M
Moving Blade Rip Saw
50 h.p.
|
|||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-4-07
|
2005
|
$30,000.
|
|
Description
|
|||
Raimann KM 310
50 h.p.
Quick Fix Arbor
|
|||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-5-07
|
2002
|
$55,000.
|
|
Description
|
|||
Dimter Opticut 104
8.3m infeed 8' outfeed table
Full optimization
|
|||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-6-07
|
1988
|
$7,500.
|
|
Description
|
|||
Weinig Rondamat 931
460V, 60 Cy, 3Ph, --9" Arbor Length, 11 1/2" max. tool dia., 1.5 HP motor, tilting head assembly for back relief grinding, clearance angle on peripheral of tools 10 degrees - 30 degrees and to each side 0 degree - 20 degree. Variable feed speed via 4-speed stepped pulley, on-board wheel dressing, 9" max. wheel dia.; 0.16 HP coolant pump. It includes: 26-Gal. coolant tank, grinding wheel flanges and 1-13/16" grinding arbor.
|
|||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-7-07
|
1992
|
$11,500.
|
|
Description
|
|||
Weinig Unimat 22 AL Feed Through Moulder Jointed
460 V, 60 Cy, 3 Ph., 5-Head (Bottom, Right, Left, Top and Bottom, Working Cap. 8 5/8" x 4 3/4". Spindle Sequence: Bottom 10 HP, Right 10 HP, Left 10 HP, Top 20 HP and Bottome 15 HP Motors. Spindle diameter 1 3/16" @ 6,000 RPM. Profile jointers spindles 2-5. Feed drive 18-120 FPM, mechanical 10 HP, belt driven carden system. Manual waxilit pump to clean and lubricate the table.
|
|||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-8-07
|
2005
|
$55,000.
|
|
Description
|
|||
Omega 2030
Optimizing Cross Cut Saw
|
|||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-9-07
|
2000
|
$45,000.
|
|
Description
|
|||
Martin T-90
Four-sided planer with automatic size control on outside spindle to run random-width boards.
Like new condition.
|
|||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-10-07
|
1988
|
$7,500.
|
|
Description
|
|||
Weinig Rondamat 931
460V, 60 Cy, 3Ph, --9" Arbor Length, 11 1/2" max. tool dia., 1.5 HP motor, tilting head assembly for back relief grinding, clearance angle on peripheral of tools 10 degrees - 30 degrees and to each side 0 degree - 20 degree. Variable feed speed via 4-speed stepped pulley, on-board wheel dressing, 9" max. wheel dia.; 0.16 HP coolant pump. It includes: 26-Gal. coolant tank, grinding wheel flanges and 1-13/16" grinding arbor.
|
|||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-11-07
|
2002
|
$35,000.
|
|
Description
|
|||
Renzo Bothonovo LCB-600
Rope moulding machine with splitting unit. Low hours. 2 h.p.
|
|||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-12-07
|
1992
|
$8,500.
|
|
Description
|
|||
Wadkin GD-220 Moulder
5 spindle with Universal Spindle
1st Bottom 7.5 h.p.
Right 7.5 h.p.
Left 7.5 h.p.
Top 10 h.p.
2nd bottom 10 h.p.
|
40mm spindles
Universal 7.5 h.p.
6000 rpm
16 cutterheads included
|
||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-13-07
|
1999
|
$21,500.
|
|
Description
|
|||
Weinig Profimat 23 E
5 Spindle
1st Bottom 10 h.p.
Right and Left 15 h.p.
Top 15 h.p.
2nd Bottom 10 h.p.
1 1/2" Spindles
|
|||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-14-07
|
2002
|
$44,000.
|
|
Description
|
|||
Weinig Unimat
Gold 6 Spindle
1st Bottom 10 h.p.
Right 10 h.p.
Left 10 h.p.
1st Top 15 h.p.
2nd Top 20 h.p.
2nd Bottom 15 h.p.
|
1 1/2" Spindles
Chrome bed plates
Made in Germany, not Asia
|
||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-15-07
|
1991
|
$14,000.
|
|
Description
|
|||
Weinig Rondamat 936
9 11/16" working width
Axial constant system
|
1.5 h.p. motor
Automatic Regrinds of tooling
|
||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-16-07
|
1989
|
$18,000.
|
|
Description
|
|||
Weinig Unimat 22AL
5 Spindle
Bottom 10 h.p.
Right 10 h.p.
Left 10 h.p.
Top 20 h.p.
Bottom 15 h.p.
|
Profile jointers spindle on 2,3,4, & 5
120 feet per min.
|
||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-17-07
|
1984
|
$11,500.
|
|
Description
|
|||
Rondamat 931 12"
12" Max. Arbor Length
9" Max. Tooling Diameter
4" Min.
|
|||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-18-07
|
1997
|
$45,000.
|
|
Description
|
|||
Weinig Hydromat 23 Select 5 Spindle
460 Volt
Working cap. 4 ¾" x 9 1/16"
Hydraulic feed system 200 f.p.m. 15 h.p.
1st Bottom 15 hp
2nd Right 15 hp
3rd Left 15 hp
4th Top 20 hp
5th Bottom 15 hp
|
Profile Jointers 2, 3, 4, & 5.
Auto Waxilit pump
|
||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-1-08
|
2003
|
$120,000.
|
|
Description
|
|||
U-1-08 Weinig Hydromat 23 C Moulder
 460 V, 60 Cy, 3 Phase6- Head (B-R-L-T-T-B), Working cap 9 1/16" x 4 ¾" . Spindle sequence: Bottom 15HP, Right 15 HP., Left 15 HP., top 25 HP., top 20 HP., bottom 15 HP motor.Spindle diameter 1 13/16 with cutter head speed 6,000 RPM.Mechanical Brakes on all spindles.Spindles 4-6 with Hydro-Lock outboard bearings.Straight jointer on Spindle #1. Profile Jointers on 2-6 (full dimension Jointing, cassette style, Profile jointers operated from outside the sound enclosure, self-indexing.Mechanical digital readouts all spindles: left spindle & top spindles with digi-set mechanical readouts.Left and top spindles with pneumatic receding chipbreakers.Feed drive equipped with: Invertor controlled 15 HP feed drive, 20-200 FPM; all feed wheels driven and with pneumatic pressure.4' Infeed table with (2) rollers above and (2) driven table rollers.Complete with: Central lubrication, automatic Waxilit pump, sound enclosure and safety hood with (2) inside lights.Control panel separate from machine with operator pedestal. Package includes 16' lateral infeed and outfeed tables with extended pull off chain. Weinig R960 grinder with Comfort package and 1 13/16" grinding arbor. |
|||
 |
I. D. Number
|
Year
|
Price in U.S. $
|
U-2-08
|
|
$72,000.
|
|
Description
|
|||
Weinig Hydromat H-23/MSL Infeed Table
6 Head (B-R-L-T-T-B), Working cap. 4- ¾".x. 9- 1/16"Spindle diameter 1 13/16" with cutterhead speed of 6,000 rpm. Spindles #4-6 with "Hydro-Lock" outboard bearings. Straight jointer on spindle #1. Profile jointers on # 2-6 (full dimension jointing; Profile jointers operated outside the sound enclousure), self indexing. Mechanical digital readouts for all spindle adjustments both radial and axial movements. Feed motor 15 HP hydraulic drive, electronic feed speed display from 20-200 FPM. Includes pedestal with moulder controls separate from electrical panel. All above feed wheels driven, pneumatic pressure for hold down.Infeed table with (2) rollers above and (1) driven table rollers, (2) powered rollers in the machine table. Chromed tables and fences.Complete with: Central lubrication, Digital display of feed height adjustment. Automatic waxilit pump. Sound enclosure with safety hood includes (1) inside light. MSL 16' Lateral infeed system with (1) additional foot of transport width. Bridge between moulder and feeder, free wheel gear for infeed of moulder and adjustable fence. |
|||